General Bent Frame Repair Information DO NOT PUBLISH

I asked our lead technician to provide the steps he would take and some visuals. Please see his response below and let me know what you think!

"The front right corner of the support is what is lifted, so that is the side that would need to be knocked down. You need to give it some freedom to move as well. So what I do is I hang that corner that I need to hit off the bench. I turn the machine and bring the front left foot all the way to the edge of a countertop, bench, etc., and then the right rear foot to the edge so that the front right portion I need to hit is way out. Then I give it one good hit on the very top edge of the frame to knock it down. I have included a severely damaged 700 for a visual. Once you essentially straighten out the support, you will put all four legs back onto a flat surface, slide on the drip tray, and inspect it. If everything looks nice and level, you're all set, or you may need to make some micro adjustments.."